A rotten egg smell near your toilet is unpleasant and should not be ignored. The odor may be caused by sewer gas, bacteria, a dry drain trap, venting issues, or plumbing problems that need professional attention.

While some odors are minor, others may point to a problem in the drain or sewer system.

Sewer Gas Odors

Sewer gas can smell like rotten eggs because it may contain hydrogen sulfide. Your plumbing system is designed to keep sewer gases out of your home, but a failed seal, dry trap, or venting issue can allow odors to enter.

Failed Toilet Seal

If the wax ring or toilet seal is damaged, sewer gas may escape around the base of the toilet. You may also notice water around the base, a loose toilet, or odors that get worse after flushing.

Bacteria in the Drain

Bacteria can grow in drains, especially if organic material builds up. Cleaning may help in some cases, but recurring odors should be inspected.

Venting or Sewer Line Problems

Plumbing vents help air move through the system. If a vent is blocked or the sewer line has an issue, odors may become more noticeable.

Do Not Cover the Problem

Air fresheners may hide the smell, but they do not fix the source. If the odor keeps returning, it is time to call a plumber.

Call Putman & Son’s Plumbing

Putman & Son’s Plumbing can help find the cause of bathroom odors and provide professional plumbing repair when needed.

The post Why Does Your Toilet Smell Like Rotten Eggs? appeared first on Putman & Son's Plumbing.

A sewer line problem is not always obvious until the warning signs become hard to ignore. Slow drains, recurring clogs, unpleasant odors, or backups can all point to issues deeper in the system. A sewer inspection helps identify what is happening below the surface so homeowners can make more informed decisions before a smaller issue becomes a more expensive one.

Understanding the kinds of problems often found during a sewer inspection can help you know when it may be time to schedule one.

Blockages and buildup

One of the most common things found during a sewer inspection is blockage. Grease, debris, paper buildup, and other materials can restrict flow over time and increase the risk of drainage problems or backups.

Even if water is still moving, a partial blockage can cause drains to slow down and create recurring issues throughout the home. That is one reason professional evaluation matters when clogs keep coming back.

Cracks or broken pipe sections

Sewer lines can develop cracks, fractures, or broken sections as they age. Shifting soil, ground movement, wear, and past damage can all contribute to pipe deterioration. These issues may allow waste or water to move where it should not, and they can interfere with proper system performance.

A sewer inspection can help reveal whether the line is structurally sound or whether repairs are needed.

Corrosion or aging pipe wear

Older sewer lines may show signs of corrosion, scale, or general wear. As materials deteriorate, the line may become more vulnerable to blockage, leaks, or collapse. Aging infrastructure is not always obvious from inside the home, which is why an inspection can be helpful when plumbing issues seem repetitive or hard to explain.

Bellies or sagging sections

A sewer line should maintain proper flow, but sometimes parts of the line sink or sag. These low spots, sometimes called bellies, can allow waste and water to collect rather than move cleanly through the system. Over time, that can lead to repeated clogs, slow drains, and performance problems.

This type of issue is not always visible without an inspection, but it can have a major effect on drainage.

Root intrusion

Trees and landscaping can affect underground plumbing lines. Root intrusion happens when roots find their way into small openings or weak spots in the sewer line. Once roots enter, they can continue growing and create more serious restrictions or damage.

Homeowners may first notice the problem as recurring drain issues or backup symptoms. An inspection can help confirm whether root intrusion is present and how serious it has become.

Misaligned or separated joints

Sewer lines made of multiple connected sections can develop problems at the joints. Misalignment, separation, or loose connections can interfere with flow and create opportunities for leaks or intrusion. This is especially important in older systems or in areas where ground conditions have shifted over time.

Why early inspection matters

A sewer line issue that goes undiagnosed can continue getting worse. What starts as a drainage inconvenience may eventually lead to backups, property disruption, or larger repair needs. A professional sewer inspection helps identify the source of the problem more accurately, which can lead to a more effective solution.

Get answers before the problem grows

Sewer inspections give homeowners a clearer picture of what is happening underground. Whether the issue is blockage, root intrusion, pipe wear, or structural damage, early detection can help you take the right next step with more confidence.

Putman & Sons Plumbing helps homeowners evaluate sewer line concerns and address problems before they become larger disruptions.

The post Common issues found during a sewer inspection appeared first on Putman & Son's Plumbing.

What Backflow Testing Is and Why It Matters

Backflow testing is an important plumbing service that helps protect the safety of your water supply. While many property owners do not think about backflow prevention often, it plays a major role in keeping clean water from becoming contaminated.

In a properly working plumbing system, water flows in one direction. Clean water enters your home or business through the supply line and moves to sinks, toilets, appliances, irrigation systems, and other fixtures. Backflow happens when water reverses direction and flows back into the clean water supply.

What Causes Backflow?

Backflow is usually caused by a pressure change in the plumbing system. This can happen when water pressure drops suddenly in the public water supply or when pressure increases inside a building’s plumbing system.

A water main break, fire hydrant use, irrigation system issue, or large demand on the water supply can create conditions where contaminated water may be pulled backward. If a backflow prevention device is not working properly, the water supply could be exposed to chemicals, fertilizers, bacteria, or other contaminants.

What Is a Backflow Prevention Device?

A backflow prevention device is installed to stop water from flowing backward into the clean water system. These devices are commonly used in commercial buildings, irrigation systems, medical facilities, restaurants, multi-family properties, and some residential applications.

Over time, backflow devices can wear down, collect debris, or fail due to age and pressure changes. That is why testing is important. A working device helps protect both the property and the larger water system.

What Happens During Backflow Testing?

During a backflow test, a certified professional checks the device to make sure it is working as intended. The test measures pressure and valve performance. If the device passes, documentation may be provided for compliance records. If the device fails, repair or replacement may be needed.

Backflow testing is often required annually for certain properties or systems. Requirements may vary depending on the type of property and local regulations, so it is important to work with a plumbing company familiar with proper testing and reporting.

Why Backflow Testing Matters

Backflow testing protects drinking water, supports compliance, and helps identify problems before they become serious. For businesses and property managers, staying current with testing can help avoid violations, service interruptions, or unexpected repair issues.

For homeowners, backflow prevention is especially important when irrigation systems, boilers, pools, or other systems connect to the water supply. Even if you do not notice a problem, the device may still need testing to confirm it is protecting your system.

Who Needs Backflow Testing?

Commercial properties, medical facilities, restaurants, industrial buildings, irrigation systems, apartment communities, and neighborhood developments often require regular backflow testing. Some residential systems may also need testing depending on the setup.

Putman & Son’s Plumbing provides state-certified backflow testing and prevention services for homes, businesses, and neighborhood projects. If your property needs testing, repairs, or compliance support, our team can help.

Internal Links:
Learn more about backflow prevention and testing: https://www.pnsplumbing.com/backflow-prevention-testing/
Contact Putman & Son’s Plumbing: https://www.pnsplumbing.com/contact/

The post What Backflow Testing Is and Why It Matters appeared first on Putman & Son's Plumbing.

Seeing Worms in a Toilet Can Be Alarming

Finding worm-like creatures in your toilet is not something most homeowners expect. While it may seem unusual, there are several possible explanations. Most commonly, these issues are connected to moisture, organic buildup, or sewer conditions.

The good news is that the issue can often be identified and corrected with a proper inspection. By understanding the root cause, you can take the necessary steps to restore your bathroom’s hygiene.

What Are the Worms Usually?

In many cases, these are not actually earthworms. Instead, they are often drain fly larvae or other insect larvae attracted to damp, nutrient-rich environments. Furthermore, certain types of parasites can occasionally enter through damaged pipes, though this is less frequent. Sewer line conditions and stagnant water create the ideal conditions for these pests to develop and thrive.

Common Causes of Worm Activity

1. Organic Drain Build-Up

Over time, hair, soap scum, and waste create a thick film inside your pipes. Because this “slime” is a food source for insects, it often attracts drain flies that lay eggs in your plumbing. Once these eggs hatch, the larvae appear as small, wriggling worms in your toilet bowl.

2. Sewer Line Issues

Cracks, backups, or slow-moving sewer lines may contribute to insect activity near your plumbing fixtures. If there is a break in the line outside your home, earthworms or other soil-dwelling creatures can actually crawl into the pipes. As a result, you might find them in your toilet after a heavy rain or a period of soil shifting.

3. Standing Water in Unused Bathrooms

Guest bathrooms or basement toilets that aren’t used often are prime targets. This is because the water in the P-trap can evaporate or become stagnant. Consequently, without the regular flow of fresh water, insects find it much easier to settle and breed.

Why You Should Not Ignore It

Even if the issue appears minor, worms or larvae in a toilet may indicate underlying drainage or sewer concerns. Ignoring the problem can allow buildup, odors, or moisture issues to worsen over time. In addition, a persistent pest problem usually points to a hidden leak or a ventilation issue that needs professional attention.

How to Prevent Future Problems

Maintaining a clean plumbing system is the best defense against pests. To achieve this, consider these helpful prevention tips:

• Keep drains clean: Use a stiff brush to scrub the area around the toilet rim and the drain opening.
• Schedule routine drain cleaning: This removes the organic biofilm that larvae feed on.
• Flush unused toilets: Ensure every toilet in the house is flushed at least once a week.
• Address sewer line issues early: If you notice slow drains throughout the house, check for deeper pipe damage.

Professional Drain Cleaning Can Help

Professional drain cleaning removes years of buildup and helps improve overall system health. In some cases, camera inspections may also be recommended to identify hidden sewer problems or cracks that are letting pests in.

By investing in professional maintenance, you can ensure your home stays pest-free and your pipes remain clear. Learn more about our drain cleaning services and sewer repair solutions for long-term plumbing protection.

The post Why Are There Worms in My Toilet? appeared first on Putman & Son's Plumbing.

Why Plumbing Codes Matter

Plumbing codes are designed to protect homeowners by ensuring systems are safe, efficient, and properly installed. These regulations cover everything from pipe materials to drainage systems and venting requirements.

If your plumbing is not up to code, it can lead to safety risks, costly repairs, and complications when selling your home.

Working with experienced professionals like Putman & Sons Plumbing ensures your system meets current standards.

Signs Your Plumbing May Not Be Up to Code

Many homeowners are unaware that their plumbing may be outdated or non compliant. Common signs include:

• Old or corroded pipes
• Improper venting
• Frequent leaks or clogs
• DIY plumbing modifications
• Outdated fixtures or connections

Older homes are especially likely to have systems that do not meet modern code requirements.

Common Plumbing Code Issues

Several issues frequently appear during inspections. These problems may not be obvious but can impact the safety and performance of your system.

Common code violations include:

• Incorrect pipe sizing
• Missing or improper venting
• Lack of backflow prevention
• Improper water heater installation
• Inadequate drainage slope

Addressing these issues early helps prevent larger problems down the road.

When Plumbing Updates Are Required

Plumbing updates are often required during renovations, home sales, or when major repairs are performed. Local regulations may require certain upgrades to bring systems up to code.

Situations that may trigger updates include:

• Bathroom or kitchen remodeling
• Water heater replacement
• Sewer line repairs
• Home inspections during sale

A professional evaluation ensures your project meets all necessary requirements.

Safety and Health Considerations

Outdated plumbing systems can pose serious risks. Improper installations may lead to leaks, contamination, or even structural damage.

For example, lack of backflow prevention can allow contaminated water to enter your clean water supply. Poor venting can cause sewer gases to enter your home.

Ensuring your plumbing meets code helps protect your health and your property.

Benefits of Bringing Plumbing Up to Code

Upgrading your plumbing system provides long term benefits beyond compliance.

These include:

• Improved system efficiency
• Reduced risk of leaks and failures
• Increased home value
• Easier home inspections and sales
• Peace of mind

Modern plumbing systems are designed for durability and performance, making them a worthwhile investment.

Schedule a Professional Plumbing Inspection

If you are unsure whether your plumbing is up to code, a professional inspection is the best place to start. Licensed plumbers can evaluate your system, identify issues, and recommend necessary upgrades.

Schedule an inspection with Putman & Sons Plumbing to ensure your plumbing system is safe, compliant, and built to last.

Protect Your Home with Code Compliant Plumbing

Keeping your plumbing up to code is essential for maintaining a safe and functional home. Whether you are planning a renovation or simply want peace of mind, a professional assessment can help you stay ahead of potential issues.

The post Is Your Plumbing Up to Code? What Homeowners Should Know appeared first on Putman & Son's Plumbing.

Why Plumbing Prep Matters Before You Leave

Planning a vacation is exciting, but overlooking your plumbing can lead to serious problems while you’re away. A small leak or unnoticed issue can quickly turn into major water damage.

Taking a few simple precautions can protect your home and give you peace of mind.

Essential Plumbing Checklist Before Vacation

1. Shut Off the Main Water Supply
Turning off your water supply is the most effective way to prevent leaks while you’re gone.

2. Check for Leaks
Inspect faucets, toilets, and exposed pipes for any signs of leaks or moisture.

3. Drain Appliances
Run your dishwasher and washing machine before leaving and ensure no water is left sitting in the system.

4. Clean Drains
Clear your drains to prevent buildup and odors from forming while you’re away.

5. Adjust Your Water Heater
Set your water heater to vacation mode or lower the temperature to save energy.

Protecting Your Home from Unexpected Issues

Consider asking a neighbor or friend to check on your home while you’re away. Catching an issue early can prevent costly damage.

Installing leak detection devices is another smart investment for homeowners.

Schedule a Pre-Vacation Plumbing Inspection

If you want extra peace of mind, scheduling a professional plumbing inspection is a great option. At Putman & Son’s Plumbing, we help homeowners identify potential issues before they become emergencies.

You may also find our guide on High Water Pressure: A Threat to Your Plumbing helpful before leaving your home unattended.

Enjoy Your Vacation Stress-Free

With proper preparation, you can relax knowing your home is protected from plumbing issues.

The post Going on Vacation? Don’t Forget to Prep Your Plumbing appeared first on Putman & Son's Plumbing.

What Is Considered High Water Pressure?

Most homeowners in Oakland County never think about their water pressure until something goes wrong. Ideal residential water pressure typically falls between 50 and 70 PSI. Anything consistently above 80 PSI can begin causing serious strain on your plumbing system.

In many parts of Oakland County, municipal water supply pressure can fluctuate. Without proper regulation, that excess pressure travels directly into your home’s pipes, fixtures, and appliances.

Why High Water Pressure Is Dangerous

While strong pressure may feel great in the shower, it quietly stresses your plumbing system behind the walls.

Common problems caused by high pressure include:

• Pipe leaks and pinhole failures
• Premature water heater wear
• Dripping faucets
• Running toilets
• Damaged washing machine hoses
• Appliance valve failure

Over time, excessive pressure weakens joints and fittings. What starts as a minor leak can quickly turn into water damage, mold growth, and costly repairs.

Warning Signs Oakland County Homeowners Should Watch For

You may have high water pressure if you notice:

• Banging pipes when faucets shut off
• Shortened lifespan of appliances
• Frequent plumbing leaks
• Fluctuating water flow
• Water heater relief valve discharge

If your home is older, especially in communities like Troy, Rochester Hills, Royal Oak, or Bloomfield Hills, your plumbing system may be more vulnerable to pressure-related damage.

The Solution: Pressure Testing and Regulation

At Putman & Sons Plumbing, we recommend professional pressure testing for homeowners throughout Oakland County. If pressure exceeds safe levels, installing or adjusting a pressure reducing valve protects your entire plumbing system.

This small investment can prevent major repairs down the road.

If you are unsure about your current pressure levels, consider scheduling a plumbing inspection. You can also explore our related service page:

• Sewer and drain services
• Water heater repair and installation
• Preventive plumbing inspections

Protect Your Home Before Damage Happens

High water pressure does not usually announce itself with a dramatic failure. It causes gradual damage over time. A simple inspection today can protect your pipes, appliances, and peace of mind.

If you live in Oakland County and suspect high pressure issues, contact Putman & Sons Plumbing for professional testing and long-term protection.

The post High Water Pressure: The Hidden Threat to Your Plumbing System appeared first on Putman & Son's Plumbing.

Why Preventive Plumbing Is Gaining Attention in Metro Detroit

Across Metro Detroit, more homeowners are scheduling preventive plumbing checks instead of waiting for something to break. With freezing winters, aging infrastructure, and older homes common throughout Oakland County and surrounding areas, proactive plumbing care has become a smart and practical investment.

Instead of reacting to burst pipes or major leaks, homeowners are turning to scheduled residential plumbing services to identify small issues before they escalate.

What Is a Preventive Plumbing Check

A preventive plumbing check is a professional inspection designed to evaluate the overall health of your plumbing system. The goal is to detect early warning signs and reduce the risk of emergencies.

A typical inspection may include:

• Checking exposed pipes for leaks or corrosion
• Testing water pressure levels
• Inspecting drains for slow flow or buildup
• Evaluating water heater performance
• Examining shutoff valves and connections

These inspections are especially valuable before winter in Michigan, when frozen pipes can quickly turn minor weaknesses into major damage.

If you are unsure about your system’s condition, scheduling a plumbing inspection can provide clarity and peace of mind.

The Cost of Ignoring Small Issues

In many Metro Detroit homes, particularly older properties, small plumbing issues often go unnoticed until damage becomes visible. A slow drip behind a wall or a partially clogged drain can eventually lead to:

• Ceiling leaks
• Mold growth
• Foundation moisture problems
• Expensive structural repairs

Routine checks help detect early warning signs before they require emergency intervention. Homeowners who invest in prevention often avoid the higher costs associated with emergency plumbing repairs.

Protecting Your Home From Water Damage

Water damage is one of the most common insurance claims in Michigan. Burst pipes during winter, leaking water heaters, and unnoticed supply line failures can cause thousands of dollars in damage.

Preventive plumbing checks reduce the risk of:

• Frozen pipe failures
• Hidden water leaks
• Sewer line backups
• Water heater breakdowns

A quick review of your system before temperatures drop can help prevent emergency calls during extreme weather.

For added protection, homeowners may also consider regular water heater maintenance to extend equipment lifespan and improve efficiency.

Extending the Life of Your Plumbing System

Plumbing systems in many Metro Detroit homes are decades old. Galvanized pipes, aging shutoff valves, and older fixtures require monitoring to prevent sudden failure.

Preventive checks help:

• Maintain proper water pressure
• Reduce stress on fittings and joints
• Identify corrosion early
• Improve overall plumbing efficiency

Extending the life of your plumbing saves money long term and prevents unexpected disruptions.

Why Metro Detroit Homeowners Prefer Prevention

With unpredictable Midwest weather and aging municipal infrastructure, local homeowners are choosing to stay ahead of problems. Preventive plumbing gives you control over timing and budgeting rather than reacting during an emergency.

It also allows you to plan upgrades gradually through trusted bathroom and kitchen plumbing services instead of rushing into urgent replacements.

When to Schedule a Preventive Plumbing Check

The ideal times for plumbing inspections in Michigan include:

• Before winter to prevent frozen pipes
• After extreme cold snaps
• When purchasing or selling a home
• Once per year as part of regular maintenance

Homes with finished basements or prior water damage benefit even more from scheduled inspections.

Prevention Is the Smarter Investment

Preventive plumbing checks are trending because they reduce risk, lower long term costs, and protect property value. Instead of waiting for a burst pipe or sewer backup, Metro Detroit homeowners are choosing proactive care.

A routine inspection today can prevent thousands of dollars in repairs tomorrow. Investing in preventive plumbing is not just a trend. It is a smart strategy for protecting your home year round.

Frequently Asked Questions (FAQ)

The post Preventive Plumbing Checks Are Trending for a Reason appeared first on Putman & Son's Plumbing.

Understanding the Purpose of a Backflow Preventer

Your plumbing system should keep clean water flowing in one direction. Sudden pressure changes from water main breaks or heavy usage can force water to reverse direction. This reversal, called backflow, allows contaminated water from irrigation systems, fire sprinklers, or other sources to enter your drinking water.

A backflow preventer stops reverse flow by sealing automatically when pressure changes occur. Because this device protects public health, most municipalities require annual backflow testing for certain residential and commercial properties.

Step 1: Visual Inspection of the Device

A certified technician begins with a detailed visual inspection. The technician locates the backflow preventer, confirms the make and model, checks for cracks or corrosion, and verifies proper installation.

Backflow preventers are typically installed near the main water line, along the exterior foundation, or connected to irrigation systems. The technician ensures the unit remains accessible and protected from environmental damage.

Step 2: Isolating the Device

To test the device accurately, the technician temporarily shuts off water to the backflow preventer. This brief interruption allows proper isolation and pressure testing.

In most residential settings, the water service interruption lasts only a short time and remains manageable.

Step 3: Pressure and Performance Testing

The technician uses a calibrated testing gauge to measure check valve pressure, relief valve operation, and internal seal performance. These readings confirm whether the device will activate during a pressure drop.

The goal is simple: prevent contaminated water from flowing backward into the municipal supply. If the device meets required standards, it passes inspection.

Step 4: Repairs if Needed

If the device fails, the technician explains the issue and recommends a solution. Worn seals, debris buildup, aging components, and internal damage often cause failures.

Technicians can complete many repairs during the same visit. After repairs, they retest the device to confirm proper performance. If the unit shows significant wear or damage, replacement may offer the safest long term option.

Step 5: Documentation and Compliance

After completing the test, the technician prepares a certified inspection report. The report includes device details, test readings, certification information, and pass or fail status.

Many plumbing companies submit this documentation directly to the local water authority on your behalf. Accurate paperwork helps you avoid penalties and ensures your system meets local compliance requirements.

How Long Does an Inspection Take?

Most residential backflow inspections take between 30 and 60 minutes. Commercial properties with multiple devices may require additional time.

Scheduling early in the year helps you avoid seasonal demand, especially before irrigation systems turn on in spring.

Why Annual Testing Matters

Mechanical components wear down over time. Temperature changes, sediment, and daily water pressure fluctuations affect performance.

Annual testing protects drinking water, maintains compliance, identifies small issues early, and reduces the risk of costly system failures. A proactive approach keeps your plumbing system reliable and your water supply safe.

Schedule Your Backflow Inspection

Backflow preventer inspections play a critical role in protecting both private property and public water systems. Annual testing ensures your device functions correctly and meets regulatory requirements.

Working with a licensed, certified plumbing professional gives you confidence that testing, repairs, and documentation meet industry standards. Taking action now keeps your water clean and your system protected year round.

The post What to Expect During a Backflow Preventer Inspection appeared first on Putman & Son's Plumbing.

Why a Ceiling Leak After a Shower Is a Serious Warning

Water dripping or staining on the ceiling after someone showers is never normal. Even if the leak appears minor, it usually indicates a hidden plumbing or waterproofing issue that can worsen quickly. Ignoring the problem can lead to structural damage, mold growth, and costly repairs. Understanding the most common causes helps homeowners act fast and limit damage.

Leaking Drain or Shower Pan

One of the most common reasons water appears in the ceiling after a shower is a problem with the shower drain or pan. The drain assembly includes seals that connect the shower base to the plumbing below. If these seals fail, water escapes every time the shower is used.

Shower pans can also crack or shift over time, especially in older homes. When water bypasses the pan liner, it can soak into framing and eventually drip through the ceiling below.

Cracked or Loose Shower Plumbing

Supply lines and drain pipes run behind walls and under floors. A small crack, loose fitting, or deteriorated joint can leak slowly, only revealing itself when water flows during a shower. These leaks often go unnoticed until visible water damage appears on the ceiling or drywall.

Signs of plumbing pipe issues may include:

• Water stains that grow larger after each shower
• Damp or sagging ceiling material
• Musty odors near the affected area

Failed Waterproofing or Grout

Tile showers rely on proper waterproofing behind the tile surface. Cracked grout, missing caulk, or deteriorated sealant allows water to seep behind walls instead of flowing toward the drain. Over time, moisture builds up and travels downward, eventually leaking through the ceiling.

Even small gaps in grout or caulk can allow significant water intrusion when exposed to daily showers.

Issues With the Shower Valve or Fixtures

The shower valve controls water flow and pressure. If the valve body or connecting pipes develop a leak, water may escape behind the wall only when the shower is running. This type of leak can be difficult to detect because the problem is hidden until water damage appears elsewhere.

Fixtures such as showerheads or diverters can also leak inside the wall if connections loosen or seals wear out.

Condensation Versus a True Leak

In some cases, homeowners mistake condensation for a plumbing leak. Excess humidity from hot showers can cause moisture buildup on cold surfaces. However, condensation typically causes light surface moisture, not dripping water or ceiling stains.

If water appears consistently after each shower or worsens over time, it is more likely a plumbing issue rather than condensation.

Why Delaying Repairs Can Cause Bigger Problems

Water leaks behind ceilings and walls rarely stay contained. Over time, moisture can weaken framing, damage insulation, and encourage mold growth. Mold can spread quickly and impact indoor air quality, leading to health concerns and expensive remediation.

Prompt repairs help minimize damage and reduce overall repair costs.

What To Do If You Notice Water After a Shower

If you see water leaking through the ceiling, take immediate steps to protect your home.

• Stop using the shower until the issue is identified
• Turn off water to the bathroom if needed
• Place a container to catch dripping water
• Contact a licensed plumber for inspection

Avoid cutting into ceilings or walls unless directed by a professional, as this can worsen damage.

When to Call a Professional Plumber

A professional plumber can identify the source of the leak using proper diagnostic tools and experience. Plumbing inspections can pinpoint whether the issue is related to the drain, supply lines, valve, or waterproofing.

Protect Your Home From Hidden Water Damage

Water leaking through the ceiling after a shower is a sign that something is wrong behind the scenes. Addressing the issue quickly helps protect your home, prevent mold, and maintain the integrity of your plumbing system.

The post Why Is Water Leaking Through the Ceiling After a Shower? appeared first on Putman & Son's Plumbing.