In the wake of climate change concerns and the push for sustainability, every aspect of our lives is undergoing a green transformation – including plumbing. Green plumbing practices are not just a trend; they’re a necessity in our efforts to conserve water, reduce energy consumption, and minimize our ecological footprint. From simple changes in habits to innovative technologies, the plumbing industry is embracing sustainability like never before.

The Importance of Green Plumbing Practices

Water scarcity is a pressing global issue, and traditional plumbing systems often contribute to wastage through leaks, inefficient fixtures, and excessive water usage. Green plumbing practices address these issues by promoting water conservation, energy efficiency, and the use of environmentally friendly materials.

Key Green Plumbing Strategies

1. Water-Efficient Fixtures: Installing low-flow faucets, showerheads, and toilets can significantly reduce water consumption without compromising performance. These fixtures are designed to maintain adequate water pressure while using less water, thereby conserving this precious resource.
2. Greywater Recycling: Greywater, wastewater generated from activities like bathing and laundry, can be recycled and reused for purposes such as irrigation and toilet flushing. Implementing greywater recycling systems reduces the strain on freshwater sources and minimizes the amount of wastewater discharged into the environment.
3. Rainwater Harvesting: Capturing rainwater from roofs and other surfaces for later use can supplement traditional water sources for activities like landscaping and toilet flushing. Rainwater harvesting systems can be simple, such as rain barrels connected to downspouts, or more complex setups integrated into building designs.
4. Energy-Efficient Water Heaters: Traditional water heaters can be energy hogs, contributing to high utility bills and carbon emissions. Switching to energy-efficient models like tankless water heaters or heat pump water heaters can significantly reduce energy consumption and greenhouse gas emissions associated with water heating.
5. Pipe Insulation and Leak Detection: Proper insulation of pipes prevents heat loss and minimizes the risk of freezing during colder months, reducing the energy required to heat water. Additionally, routine leak detection and repair help conserve water and prevent property damage.
6. Environmentally Friendly Materials: Opting for plumbing materials that are eco-friendly, such as recycled or sustainably sourced materials, helps reduce the environmental impact of construction and maintenance activities. Examples include using copper pipes made from recycled metal or choosing PVC-free piping alternatives.

The Role of Technology

Advancements in technology are driving innovation in green plumbing practices. Smart water meters, for instance, enable homeowners to monitor their water usage in real-time, empowering them to identify and address wasteful habits. Similarly, sensor-based fixtures and automated irrigation systems ensure precise water delivery, optimizing efficiency and reducing waste.

The Benefits of Green Plumbing

Embracing green plumbing practices offers numerous benefits, both for individuals and the planet:

• Cost Savings: Water and energy-efficient fixtures can lead to substantial savings on utility bills over time.
• Conservation of Resources: By reducing water and energy consumption, green plumbing helps preserve precious natural resources for future generations.
• Environmental Protection: Minimizing water wastage and energy usage reduces the ecological footprint associated with plumbing activities, mitigating environmental degradation.
• Improved Indoor Air Quality: Choosing eco-friendly plumbing materials can contribute to better indoor air quality by reducing the release of harmful chemicals into the environment.

Green plumbing practices are not just about conserving resources; they’re about fostering a sustainable future. By adopting water-saving technologies, utilizing eco-friendly materials, and promoting responsible water usage, we can all contribute to a healthier planet. Whether you’re renovating your home or constructing a new building, incorporating green plumbing principles is a step towards a more sustainable way of living. Let’s embrace the eco-friendly plumbing revolution and pave the way for a greener tomorrow.

The post The Eco-Friendly Plumbing Revolution appeared first on Putman & Son's Plumbing.

Bathroom mold is a common concern, posing both health risks and potential damage to your property. Read along to learn about effective methods for removing and preventing bathroom mold and how Putman and Sons Plumbing is your trusted ally in addressing plumbing issues that may contribute to mold growth.

Understanding Bathroom Mold:

Mold thrives in damp and humid environments, making bathrooms an ideal breeding ground. Not only is it unsightly, but mold can also lead to respiratory issues and compromise the structural integrity of your home. Taking proactive steps to remove and prevent mold is essential for a healthy and mold-free bathroom.

Removing Bathroom Mold

• Ventilation Matters: Ensure proper ventilation in your bathroom by using exhaust fans or opening windows during and after showers. Adequate airflow discourages mold growth.
• Regular Cleaning Routine: Incorporate a regular cleaning routine using mold-resistant products. Pay special attention to grout lines, corners, and other areas prone to moisture accumulation.
• Natural Mold Removers: Opt for natural mold removers like vinegar, baking soda, or tea tree oil. These substances effectively eliminate mold without harsh chemicals.

Preventing Bathroom Mold

• Fix Plumbing Leaks Promptly: Leaky pipes and faucets create a conducive environment for mold. Putman and Sons Plumbing can assist in promptly fixing any plumbing issues to eliminate potential mold sources.
• Seal Grout Lines: Seal grout lines regularly to prevent moisture infiltration. This simple step can go a long way in hindering mold growth.
• Invest in a Dehumidifier: Reduce excess humidity by investing in a dehumidifier. This is particularly beneficial in bathrooms with inadequate ventilation.

We’re The Perfect Plumbing Partners For You

A mold-free bathroom is achievable through a combination of effective removal methods and preventive measures. Get the plumbing services you need by visiting our Contact Page or call 248-652-0990. Trust Putman and Sons Plumbing to be your partner in maintaining a healthy, mold-free home. Don’t let bathroom mold take hold – take proactive steps and rely on the plumbing expertise of Putman and Sons Plumbing for a clean and dry sanctuary.

The post Banishing Bathroom Mold appeared first on Putman & Son's Plumbing.

Many homeowners prefer to try to fix slow shower drains themselves before calling a plumber. There are several inexpensive methods you can try without the help of a professional.

• The Boiling Water Method

Boiling water can help break down material that gets stuck in your drains. To begin, boil a pot of water on your stove. Keep in mind that you will have to carry it to the drain, so you should keep the area clear of obstacles, pets, and children before you move the boiling water to the bathroom.

Next, pour the boiling water down the drain. Take care not to splash hot water on bathtub accessories because the heat could cause damage.

• The Plunger Method

A plunger can sometimes clear drains just like it does toilet clogs. You may want to apply petroleum jelly to the edges of the plunger to achieve a stronger seal. Add water to submerge the plunger then plunge. This method doesn’t always work but can help in some instances.

• Remove Clogs by Hand

Remove the drain cover and look inside the drain. If you can see the clog, then you may be able to reach in and remove it. A flashlight can help you get a better view. You can reach in with your fingers to pull it out. You can wear gloves or use a tool instead if you don’t want to touch what’s down there. This method only works if the clog is close enough to reach.

What If I Can’t Clear a Shower Drain?

If you can’t find the clog or are unable to clear it, then you should call a plumber. Putman & Son’s Plumbing are available for all of your plumbing need. We can clear your shower drain and also identify the cause and make recommendations to prevent future blockages. Contact us today to schedule a visit.

The post How to Clear Slow Shower Drains in Your Home appeared first on Putman & Son's Plumbing.

Sewer leaks are often not on the main line and you need to investigate to find the source. The best way to do this is with a smoke test that will pinpoint the source of the leak and odor. If you cannot get to the bottom of a foul smell or leak, contact Putman and Son’s certified plumbers. We are available 24/7 to help you.

The post Smoking Out Sewer Leaks appeared first on Putman & Son's Plumbing.

Sump pumps can be a great investment. This device is installed in the lowest part of your crawlspace or basement. It’s usually placed in a pit. Water can flow into the pit naturally or through drains. When a certain level is reached, the unit will turn on and pump the water out and away from the structure, so it doesn’t cause damage.

Types of Sump Pumps

Sump pumps fall into one of two categories: submersible and pedestal. Submersible models have a motor that’s mounted inside the unit and sealed. It’s more visually attractive, usually lasts longer, and tends to be safer for homes with children. The downside is that submersible pumps tend to cost more and are harder to reach.

Pedestal models are designed with the motor mounted above the sump. It is easier to see, which makes it easier to repair if needed. This type tends to cost less than submersible sump pumps but doesn’t usually last as long.

5 Signs That You Need a Sump Pump

Chances are you need a sump pump installed if:

• Your basement has flooded in the past
• You live on a low-lying property or one with soil that traps water
• Your region sees high amounts of snow or rain annually
• You have a sump pump that’s over six years’ old
• You have invested in a finished basement that you want to protect

If any of the above apply to you, now is the time to look for sump pumps. Paying for one now could save you thousands of dollars in water damage repairs in the future. Contact Putman & Son’s Plumbing today to make an appointment with a certified plumber about installing a sump pump in your home.

The post Do I Need to Install a Sump Pump? appeared first on Putman & Son's Plumbing.

A garbage disposal adds convenience to your kitchen – as long as it works. Problems can occur for several reasons. A foreign object may fall in and cause a blockage. The disposal may not work correctly if garbage is fed into it too fast or without enough water to flush the drainpipes. What can you do if you have a clogged garbage disposal?

• Switch Off Power to the Garbage Disposal – Switch off all power to the garbage disposal before working on it. If you don’t have a switch, you can turn off the breaker on the power panel.
• Inspect the Garbage Disposal – Visually inspect the inside of the garbage disposal. Never put your hands inside the unit at any time, even if the power is off. Switches can be defective, so this is a necessary safety measure. A flashlight can help you see the interior.
• Remove Foreign Object from Disposal – If you see something that doesn’t belong in the disposal, remove it. This should be done carefully with a pair of pliers, so your hands stay away from the blades.
• Reset the Garbage Disposal and Test – Give the disposal 15 minutes to cool down before turning the power back on and resetting it.

If you are still having trouble, contact Putman & Son’s Plumbing to schedule a repair or replacement. Not all garbage disposals are alike. We can install one that meets your needs.

The post How to Fix a Clogged Garbage Disposal appeared first on Putman & Son's Plumbing.

The post Happy 4th of July! appeared first on Putman & Son's Plumbing.

The post Putman & Son’s Plumbing Wishes You a Relaxing Father’s Day appeared first on Putman & Son's Plumbing.

Sewer line backups can cause a mess in your home. According to the Insurance Institute for Business & Home Safety, the average plumbing drain system failure costs around $4,400 per incident after paying a deductible. That’s a lot of money to have to pay out for an emergency. The best thing to do is to take steps to prevent sewer line backups, so you are less likely to have to deal with an expensive problem.

• Update and Maintain Your Sewer Lines – This is especially important for older homes. If your system was installed before the mid-1950s, then it probably uses clay lines. These usually include a lot of joints where roots can enter and cause blockages. Update and maintain your system to prevent serious blockages before they have a chance to form.
• Be Careful About What Goes Down the Drain – Do not put cooking oil, grease, pasta, potatoes, rice, and fibrous vegetables like onion and celery down the drain. Also, do not flush anything but toilet paper. Even flushable wipes and similar products should be kept out of your sewer lines.
• Look for Soggy Areas in Your Yard – If you haven’t seen rain for at least several days, look around your yard for soggy areas. If the ground is muddy or soft, it could mean you have a leak in an underground line. This should be fixed as soon as possible.
• Install a Backward Prevention Valve – A backwater prevention valve can be installed on a sewer line in your basement. This will stop sewage from flowing back into your home in case of a backup.

Sewer line backups can be costly. Contact Putman & Son’s Plumbing today for any sewer blockage or issues before it becomes a larger problem, so we can keep your system flowing properly.

The post How to Prevent Sewer Line Backups in Your Home appeared first on Putman & Son's Plumbing.

To our fallen soldiers, we respect and appreciate your great sacrifice for us.

The post Memorial Day 2019 appeared first on Putman & Son's Plumbing.