If you’re tired of running out of hot water or watching your energy bills climb, a tankless water heater could be the solution you’ve been looking for. Unlike traditional water heaters that continuously heat and store water in a large tank, tankless models heat water only when you need it—delivering a virtually endless supply.

Tankless water heaters use powerful heat exchangers to warm water on demand as it flows through the unit. Because they don’t maintain a full tank of hot water, they consume significantly less energy, lowering your monthly costs and reducing your environmental impact.

Beyond efficiency, tankless heaters take up less space and often last longer—many models provide reliable hot water for 20 years or more with proper maintenance. Whether you have a busy household or a smaller home, there’s a tankless system to fit your needs.

Our experts at Putman & Son’s Plumbing can walk you through selecting the right size and model, ensuring professional installation and optimal performance.

Ready to upgrade to a smarter, more efficient water heating solution? Call us today to schedule a consultation and discover the benefits of going tankless.

The post Tankless Water Heaters, Efficiency Meets Endless Hot Water appeared first on Putman & Son's Plumbing.

If your water heater is more than ten years old, it may be time to consider replacing it. As temperatures get colder, it becomes more difficult for a water heater to do its job. Take a look at your water heater to ensure all connections look good and there is no rust anywhere. You’ll also want to note any leaks surrounding the heater.

If either one of the above issues is evident, you may need a new water heater.

If your water heater is on the older side, you may be pleasantly surprised by the variety of options available today. New technology focuses on energy conservation and reducing your monthly bills.

Our team is available to look at your current water heater and provide recommendations for repair or replacement.

Putman and Sons offer two brand options for a replacement water heater, and we can provide recommendations based on the needs of your household.

The post Looking to Get a New Water Heater? appeared first on Putman & Son's Plumbing.

Everybody loves hot water. A warm shower is the most basic of luxuries. However, an underpowered water heater can ruin the experience, leaving you jumping out of a suddenly cold shower as the hot water runs out. For many people, the best part of staying at a hotel is the endless hot water supply. With the right water heater installed in your home, you can have that experience every day.

Most homes have conventional water heaters that heat a storage tank full of water. These water heaters may be run on gas or electric power. They are generally the most affordable water heater to buy and install, but they come with one major drawback. Once the storage tank has been emptied, you are out of hot water.

It can take a long time, up to an hour and a half for some models, to heat a new tank of hot water. You can combat this problem by installing a huge tank, but larger tanks require more operating power. If you don’t often run out of hot water in your home, your current conventional water heater may be all you need. If you constantly find yourself frustrated by a lack of hot water, it might be time to consider other options.

Tankless water heaters heat water on demand as it passes through the device’s heating coils. They run best on natural gas, but tankless water heaters can also be installed in all-electric homes. As long as you choose an appropriately sized unit, you can have an endless supply of hot water.

Whether you go conventional or tankless, we can make sure you get to enjoy your long, hot showers. Give us a call, and we’ll help you figure out the best options for your needs and budget.

The post What Type of Water Heater Do You Need? appeared first on Putman & Son's Plumbing.

The water heater is one of the most-used appliances in your home. From climate control to laundry machines, dishwashers and showers, your water heater is under constant use. Here are a few ways to know if you have a faulty water heater.

Noise

If you hear new noises from your water heater, it may be time for professional servicing. Your water heater may be making noises for various issues, including sediment buildup or defective heating elements. Call our professionals for guidance on possible ways to resolve the impending problem.

Water Quality Issues

Is your water showing a rusty or muddy color? Or, does it have a smell? These indicate that there may be something wrong with your water heater. Sediment buildup in your heater can impact the color of your water. You may also be smelling dissolved compounds from the heating element.

Leaking

Leaks and corrosion are surefire signs that your hot water tank is failing. As water escapes the tank and corrodes the metal on the outside, you may see leaks and drips around your system. Take note of these leaks, and call us to arrange a replacement soon.

Reduced Hot Water

No one likes to take cold showers, especially when they’re not planning for it. If your water heater suddenly can’t keep up with your demands for hot water, there may be a problem with it heating effectively.

Low Water Flow

Sediment buildup in the pipes connecting to your heater, or in the heater itself can restrict water flow through your home’s plumbing, causing a decrease in water pressure.

Putman & Son’s Plumbing is Rochester Hills’ go-to source for information on a wide range of water heaters. Contact us today for more information about popular and efficient water heaters. Our master plumbers are experts regarding water heater repair, removal, and installation. If you think you have a faulty water heater, call Putman & Son’s Plumbing at (248) 652-0990.

The post Signs You Have a Faulty Water Heater appeared first on Putman & Son's Plumbing.

A water heater is an essential part of any modern home. It can be expensive to replace. The best way to get your money’s worth is to keep it running at maximum capacity for as long as possible. The following tips will help you maintain your water heater.

• Add Insulation to Save Energy

A fiberglass insulation jacket can help your water heater operate efficiently, especially if it is an older model. Insulation can reduce heat loss by as much as 45% which can translate to up to a 9% reduction on your water heating expenses.

• Flush Sediment from the Tank

Your water heater tank should be drained at least once per year. If it’s a newer system, you may only need to drain a few gallons. Check the water for debris and sediment.

If you notice either, then you should do a full flush. To do this, turn the temperature down and empty the tank. Turn the water flow on while the drain is still open and let water flush it out for a minute or so to remove remaining sediment.

• Test the Temperature-Pressure Relief Valve

Test your temperature-pressure relief valve once per year. This is done by discharging it a few times. Look for small leaks in the valve after testing.

• Use Vacation Mode When Traveling

Vacation mode is available on gas water heater models. This setting will keep the pilot light burning without heating the water. Vacation mode should be used when you are away from home for an extended period of time.

• Inspect Annually for Leaks & Corrosion

Perform an annual water heater inspection to look for leaks or corrosion on the tank, pipes, and in the general area of the appliance. Also, make sure nothing is being stored close to the water heater.

If you need an inspection, notice issues, or have questions, contact Putman & Son’s Plumbing. We are available to help customers throughout Southeast Michigan prolong the life of their water heaters and replace them when needed.

The post 5 Water Heater Maintenance Tips That Can Save You Money appeared first on Putman & Son's Plumbing.

Many homeowners find themselves tackling avoidable issues once colder temperatures arrive. Now is the perfect time to perform regular and preventative plumbing maintenance to prepare your home for the winter season, which is when most plumbing issues arise.

Below are five important Fall plumbing tips:

#1. Drain and close interior shut-off valves after removing hoses and shutting off your outdoor faucet. Older homes may not have this feature. It’s important to close these valves once you have finished using your exterior water faucets. Closing this valve helps interior pipes from freezing and bursting.

#2. Apply insulating material to pipes in unheated areas of your home. This is a common reason for a pipe to burst in a seemingly well-prepared home.

#3. Make sure your water heater is in good operating condition. Inspecting your water heater independently or as part of a plumber’s yearly inspection is critical both for the efficiency of your home and the longevity of the heater itself. Trained plumbers will perform a flush of the system to remove sediment that has built up.

#4. Leaving your home for an extended period? Shut off the main water lines in your home to keep pipes healthy. There’s little point in heating a home with no inhabitants, though it’s common for homeowners to forget this crucial step. If you are planning on taking a mid-winter trip, make a calendar note a day before you leave.

#5 Adjust the temperature setting of your home’s water heater. The optimal temperature for most water heaters is 120° F, but you can consult your unit’s manual for more information. Setting your unit too high will incur extra expense and may make hot water unsafe for bathing.

If you are interested in Putman & Son’s Plumbing Maintenance program or want to learn more, please contact us.

The post Fall Plumbing Tips | Prepare Your Home appeared first on Putman & Son's Plumbing.

Benefits of a Professional Water Heater Installation

When a new water heater is needed, most people hire a technician or plumbing company for installation to handle the job. You’ll get several significant benefits from hiring a professional with experience for your water heater installation rather than trying it yourself if you haven’t connected a water heater before. It’s recommended to choose a company that has a proven track record of success. Putman & Son’s Plumbing has been installing water heaters since 1985.

Your water heater will be installed the right way the first time.

You don’t want to have to deal with issues with your water heater installation such as having to re-install it, leaks, or having to spend money to replace it. The certified, experienced plumbing professionals at Putman & Son’s Plumbing will do the job right the first time around, ensuring that you don’t have to deal with costly repairs or mistakes that will end up being a major inconvenience in the future if they lead to water heater issues or leaks.

You’ll save time and have a functional water heater fast.

When your water heater isn’t working you want to get it back up and running in the shortest amount of time possible. Putman & Son’s Plumbing has a 24/7 hotline in order for you to have a new water heater working quickly and the way you need it to so that you can get on with your life. To learn more about types of water heaters that will best meet your particular needs or to schedule an installation, contact Putman & Son’s Plumbing today.

The post Benefits of a Professional Water Heater Installation appeared first on Putman & Son's Plumbing.

Below are cost saving, fall and winter preparatory tips to do now to prevent many common plumbing issues.

Prepare your pipes for freezing temperatures

It is highly recommended to prepare your pipes for freezing temperatures as fall gets underway. When the temperature drops below freezing there is the potential for your pipes to burst, which can produce quite a mess and be expensive to fix.

To protect against this, be sure to check for any areas of your home that have uninsulated pipes. Common areas that are not insulated include: the outer walls, the garage, and the cellar. You can purchase a plumbing insulation kit from most hardware stores, and it is fairly easy to install on your home.

Make sure your water heater is running properly

Check to make certain your water heater is properly functioning, as it is important for it to work adequately during the fall and winter. Now is a good time to check that no repairs are needed and that the sacrificial anode rod is working correctly.

You can inspect your heater yourself if you have the experience and knowledge or hire one of our professional master plumbers.

Set your water heater temperature at no greater than 120 F to prevent energy waste and scalding.

Call us if you need a plumbing inspection

If you are in need of a plumbing inspection before the winter to prevent your pipes from freezing and/or to have a professional check of your water heater, contact Putman & Sons Plumbing for an appointment. We also have maintenance plans for all seasons to proactively help prevent costly plumbing problems.

The post Preparing Your Home’s Plumbing for the Fall and Winter appeared first on Putman & Son's Plumbing.

Give “Tanks” or “Tankless” Water Heaters This New Year!

The post We Wish You Delightful New Year! appeared first on Putman & Son's Plumbing.

Many of us find out we have a broken or faulty water heater the moment we step in the shower and are shocked awake by a cascade of ice cold water. We depend greatly on hot water and therefore the boiler is of major importance. When the boiler breaks down, a loss of hot water in the house is the result. You may not need a new boiler. It may be a loose connection or a broken part that can easily be replaced. Many problems can be fixed with new heating supplies which can save you a lot of money. Call Putman & Son’s master plumbers and we will come out quickly to access your boiler and let you know the best fix for your particular problem.

The post Ice Cold Shower? appeared first on Putman & Son's Plumbing.